Standard Changes
Notice of change in thickness of white ash wood
[THE TABLE / White Ash Black Steel]
For orders received after November 13, 2020, we have made the following changes to product specifications and prices.
[THE TABLE / White Ash Black Steel
Top board thickness: (Old) 30 mm → (New) 25 mm
Price: (Old) 75,500 yen → (New) 69,000 yen
Notice of Switching Old Wood Product Plates
[THE TABLE / Black/ White Steel]
[THE CAFE TABLE / Old wood]
[THE LOW TABLE / Black/ White Steel]
[ THE BOARD / Old Wood ]
[ THE SHELF / Old Wood ]
【 THE TV BOARD / LOW TABLE / Old wood 】
[THE TABLE x Antique wood x Black Steel]
We are pleased to announce that we are going to open our website for old wood products, which were on the website until October 29, 2020
From October 29, 2020 onwards, we will be selling these products with the wooden planks changed from "old wood" to "solid cedar vintage style".
The price and size of the products will be the same as the "old wood" products, but the wood used has been changed.
For details, please refer to this page.
Also, due to supply and quality control issues, there are no plans to resume the sale of used wood products in the future.
We are very sorry for those customers who have been waiting for the "old wood" products that have been out of stock for a long time.
We thank you for your understanding.
Notice of price and size changes for standing desks
[THE TABLE x Rubberwood N, T, B x Black Steel
[THE TABLE x Antique wood x Black Steel]
For orders received after August 18, 2020, we have made the following changes to prices and orderable sizes.
[THE TABLE x Rubberwood N, T, B x Black Steel
Price: (Old) ¥68,500 → (New) ¥53,400 Available sizes: (Old) D80-100cm → (New) D66-80cm
[THE TABLE x Antique wood x Black Steel]
Price: (Old) ¥73,500 → (New) ¥62,500 Available sizes: No change
Solid cedar round table 4pins Discontinued
[CTB-K03-4PIN THE CAFE TABLE / Solid cedar wood x Round]
The 4 Pin Legs model of the solid cedar round table (corresponding to a diameter of 65-80cm) will be discontinued as of July 14, 2020, in order to ensure the strength and safety of the top board.
KRT112 (old model number)] Solid cedar wood - 4 Pin Legs Round Table
Round Low Table Steel Plate small
Due to Kanademono's new branding intentions, we have decided to discontinue the Round Low Table Steel Plate small in conjunction with our website renewal on July 9, 2020. The following products will be discontinued. Please note that the following products have been discontinued.
KRT106 (previous model number): Teak Brownl - Steel Plate small round low table.
KRT107】Natural - Steel Plate small round low table
KRT114 (old model number): Solid cedar wood - Steel Plate small round low table
Change in the standard of the special-size table with square iron legs
THE TABLE / Rubberwood N x Black Steel x W181 - 300cm
After April 27, 2020, the standard of the square iron legs (black) of the corresponding oversize tables for orders received have been changed as follows
Iron tube size: 2.5 mm.
Current model】60 x 40 (width x depth) mm
Old Model】50 x 25 (width x depth) mm
Leg Height:.
670mm (not including the adjuster) *The height of the adjuster is from about 10mm
The height of the adjuster is from 7mm to 665mm (not including the adjuster)
The shape of the upper part of the legs (ground surface to the top plate):.
Current Model】Flat Plate 【Older Model】Tube-type (See images)
Adjuster Design:.
Current model] Round shape [Old model] Chrysanthemum shape (see image)
Design and Specification Changes of Desk Chairs
OCH-K03 Stylish - Modern Silver gray Desk Chair
The design of the legs and the specifications (material and finish of the legs) of the current model differ from those of the previous model, which was on sale until April 2020.
Material of the legs
Current Model】Aluminum Old Model】Metal
Leg finishing:.
Current model] Matte finish [Old model] Matte finish
Changes to BLOCK&TRAY standards
[Wiring hole options BLOCK&TRAY]
For orders received on or after March 16, 2020, the wiring hole and block sizes have been partially changed.
Wiring hole size
Current model】370×130 mm [Previous model】370×150 mm
Size of the block:.
Current Model] 368 x 118 mm [Previous Model] 368 x 138 mm
Temporary changes in the standards of square steel legs
[SQU-K11 THE LEGS / SQUARE x BLACK STEEL]
From March to July 2020, due to the effects of the new coronavirus, the products with black square iron legs (black) were temporarily sold with a different size of slim type as shown below.
Size of Iron Tube: 1.5mm
Current model: 60 x 40 (width x depth) mm
Slim Type: Right】50 x 25 (width x depth) mm
Leg Height:.
670mm (not including the adjuster) * Adjuster height is approximately 10mm to
Slim Type: 665mm (not including the adjuster) *The height of the adjuster is about 7mm to
The shape of the upper part of the legs (ground surface to the top plate):.
Current Model : Left in the Picture : Flat Plate Right in the Picture : Slim Type : Right in the Picture : Tube Type
Adjuster Design:.
Current Model] Round Shape [Slim Type] Chrysanthemum Shape
"Iron Legs"
Changes in the standard of trapezoidal stainless steel legs
[TRP-K21 THE LEGS / Trapezoid x Stainless]
After February 12, 2020 In order to enhance the stability of the trapezoidal stainless steel legs for orders received, the specifications have been changed as follows
Width at the base: 2.5 mm
Current model】460mm 【Older model】400mm
Change in the standard for standing desks with steel legs
【 THE TABLE / Standing Desk】 【 THE LEGS / Standing Square x Black Steel
After December 20, 2019 The standard of steel legs of standing desks for orders received has been changed as follows
Width of legs:.
Current model】650mm
Previous model】710mm
Leg Height:.
Current model] 965mm (not including the adjuster)
Old Model]1000mm (no adjuster)
Accessories.
Current Model] Adjuster, bolts and washers are included.
Old Model] None.
Mounting holes in the top plate
Current model] Yes (Top plate with onigmatic nut embedded) [Previous model] No
Changes to Cafe Table Specifications
[CTB-K01-3PIN THE CAFE TABLE]
After October 28, 2019 For orders received on or after October 28, 2019, the following standard changes have been made to the cafe table 3pins type
Table height:.
Current model] 695mm (without a steel plate for reinforcement)
Previous Model】710mm (with a steel plate for reinforcement)
Change in the standard for trapezoidal feet
[TRP-K11 THE LEGS / Trapezoid x Black Steel]
After October 9, 2019 For trapezoidal iron legs (black) for orders received, the following standard changes have been made to increase stability.
Width at the bottom:.
Current model】460mm 【Older model】400mm
Change in the Standard of Square Steel Legs
[SQU-K11 THE LEGS / SQUARE x BLACK STEEL]
After September 18, 2019 For orders received on or after September 18, 2019 Square iron legs (black), the standards have been changed as follows
Iron tube size:.
【Current model】60 x 40 (width x depth) mm
【Old Model】50 x 25 (width x depth) mm
Leg Height:.
670mm (not including the adjuster) *The height of the adjuster is from about 10mm
The height of the adjuster is from 7mm to 665mm (not including the adjuster)
The shape of the upper part of the legs (ground surface to the top plate):.
【Current Model】Flat Plate 【Old Model】Tube-type
Adjuster Design:.
【Current model】 Round shape【Old model】 Chrysanthemum shape
Change in Standards for Old Wood Tops
【 TBL-K02 THE TABLE / Old Wood】 【 TT-K02 THE BOARD / Old Wood
After March 19, 2019 We are changing the standard for the tops of old wood tables for orders received as follows
Depth of the top board:.
【Current model]720mm (3-piece set)
【Old Model】800mm (4-piece set)